Fujikura Composite Inc.



Arch Breaker

Arch Breaker

Fujikura’s Arch Breaker (granular material discharge unit) has been highly demanded by the particulate material industry handling ore powder, powdered limestone, cereal powder, etc.
This unit prevents or solves troubles like compacting, bridging and rat holing of particulate materials in a hopper (storage tank) and makes the discharge smooth and complete to maximize the operational efficiency.
Arch Breaker will help you reduce costs and improve safety of hopper-related works.

  • Features
  • Spetrifications
  • Safety Precautions

Features

1. Directly impacts particulate materials.
2. The Inclination angle of a hopper sidewall becomes steeper.
3. Also shakes particulate materials.
4. The hopper sidewall repeats up-and-down motion.
5. The unit will be designed to fit the configuration of the existing hopper.
6. Produces relatively low noise (averagely 80 horn).
7. No air contacts to particulate materials.
8. Less power consumption. 100V – 200V (50Hz – 80Hz)
9. Easy maintenance.

Peculiarity

Specifications

Items Specifications
Ground fabric Depending on stockpiles or chemical characteristics of particulate materials, thick fabric of vinylon, nylon or tetron is chosen.
material Depending on particulate materials to be contact with, optimum material is chosen.
Composition Diaphragm, air cylinder, control unit, air supply exhaust system, mounting plate, set of screws, piping material
Control unit 450 * 600 * 250 mm
air supply exhaust system 550 * 700 * 250 mm
Air pressure used 0.07 – 0.1 MPa
spec1
spec2

Safety Precautions

  • Do not perform installation work near fire.
  • While using sharp-edge tools, make sure not to damage the product.
  • Store away from heat and moisture.
  • Keep air pressure at the prescribed level.