ELECTRO-PNEUMATIC TRANSDUCERS　RT SERIES ･With the use of incorporated Floating system , RT Series Transducers reduce a supply pressure to a regulated Output pressure which is directly proportional to an Electric Input Signal. Available in Model RT・I/P ・Highly accurate control of air pressure. Linearity ( 1.0 to 1.5 % ) F.S. Hysteresis ≦ ±1.0% F.S ・Outstanding low supply pressure Sensitivity. Output pressure is virtually unaffected (≦ ±0.5 % F.S ) by variations in supply pressure. ・Large Flow Rate allows direct drive of pneumatic control devices. ・Field Reversible. ・Excellent Repeatability Normal load ≦ 2.5 % F.S. Intermittent load ≦ 0.5 % F.S. ・Wide Adjustment Range. Span Adjust Range : Model RT・E/P-8-2 0.65 to 0.82 MPa Model RT・I /P-8-2 0.24 to 0.82 MPa ・Mounts at Any Angle. Zero/Span Readjustment required. ・Small size permits use in restricted areas. ・Principal Dimensions □54×105 Specifications Model RT・E／P−8−2 RT・I／P−8−2 RT・I／P−1−2 Working Fluid Clean Compressed Air Set Pressure Range　MPa 0.02〜0.82 0.02〜0.1 Input signal Control System Voltage (2-line) Current (2-Wire) Voltage VDC 0〜10 − Impedance Ω 805 − current mADC − 4〜20 Impedance Ω − 260 180 Linearity　％.F.S 1.5 1.0 Hysteresis　％.F.S 1.0 Repeatability　％.F.S ±0.1 ±0.5 Step Response　sec 1.0 0.2 Span Adjust Range　MPa 0.65 to 0.82 0.24 to 0.82 − Relief Sensitivity　MPa Set Pressure Range＋0.001以下 Air Consumption　Nl/min 3.7 以下 4.8 以下 Range of Working Temperature　℃ 5 〜 60 Pipe Port　Rc（PT） 1／4 Gauge Port　Rc（PT） 1／4 mounting Bracket (Standard) Weight　kg 0.94 Ordering Information RT ・ E／P − 8 − 2 − G025 �@ �A �B �@ �A �B Input Signal Set Pressure Range option (Pressure gauge) E／P Voltage Conversion System 1 0〜0.1MPa G025 0〜0.025MPa I／P Current Conversion System 8 0〜 0.82MPa G060 0〜0.6MPa G010 0〜1MPa

For further details, refer to, Cat.No．KS−130E For further details, refer to,CADdata

戻る