PC SERIES CYLINDERS ・PC Cylinder are constructed with mounting dimensions conformed to JIS Standard. ・Embedded Sending switch protect the Cylinder from mal function in the most difficult industrial environment. Specifications Model Single Action(Push) / Double Action Cylinder Bore　mm 20 to 50 Stroke　mm 10 to 50 Working Fluid Compressed Air ( Non-lubricated ) Range of Working Pressure　MPa 0.015 to 0.7※1 Rod Bearing Oil impregnated metal (Dry Bearing) Range of Working Temperature　℃ 0 to 60 Mounting Foot(L)-，Foot(Extended L)-，Front Flange-， Rear Flange- Mount ※1：0.02 to 0.7MPa for Cylinders of bore φ20 mm. PCS Series （Single Action） Size Table PCS- Cylinder Bore Stroke 20 10 32 10 40 10 　 PCD Series （Double Action） Size Table PCD- Cylinder Bore Stroke 20 10 20 32 10 20 30 40 10 20 30 40 50 10 20 30 40 　 Ordering Information ＰＣＳ − 20 − 10 − S0 − L − ZE101 A 1 �@ �A �B �C �D �E �F �@ �A �B �C Model Cylinder Bore - Stroke Spring Mounting PCS Single Action None Double Action None Body PCD Double Action Ｓ0 None L Ell S1 Standard Spring RL Extended Ell F Front Flange R Rear Flange �D Mark Wire Type Switch Type Indicator Lead Wire DC Volt AC Volt 2- Wire 3- Wire Proxi- mity Contact Lamp Side Face Top Face 10- 　28 4.5- 　28 5- 　28 85- 　155 None − − Without Sensor Switch ZE 135 ○ ○ ○ ○ ○ ZE 155 ○ ○ ○ ○ ○ ZE 235 ○ ○ ○ ○ ○ ZE 255 ○ ○ ○ ○ ○ ZE 101 ○ ○ ○ ○ ○ ZE 201 ○ ○ ○ ○ ○ ZE 102 ○ ○ ○ ○ ○ ○ ZE 202 ○ ○ ○ ○ ○ ○ �E �F Length of Lead Line Number of Switches A 1m 1 1pc. B 2m 2 2pcs. 3 3pcs.

For further details, refer to, Cat.No．KS−570E For further details, refer to,CADdata

Back