FC SERIES CYLINDERS ・Standard type of BF Cylinders, available in a wide range of bore sizes from φ10 to 200mm. ・Each size of cylinders is available both in single-push action and double action models, except that single action models only for bore smaller Specifications Model Single Action(Push) / Double Action Cylinder Bore　mm 10 to 200 Stroke　mm 6 to 320 Working Fluid Compressed Air ( Non-lubricated ) Range of Working Pressure　MPa 0.01 to 0.7 (※1) Range of Working Temperature　℃ 0 to 60 Rod Bearing Oil impregnated metal (Dry Bearing) Mounting ( for Cylinders of bore not less than φ25mm) Rear Flange, Front Flange, Pivot, Trunnion, L-Mount ※1：0.02 to 0.7MPa for double action Cylinders of φ25 mm bore size only. Nominal Size Table of Model FCS- and FCD- Cylinders FCS- Bore Stroke 10 6 12.5 11 16 10 16 20 8 22 　 FCS-FCD Bore Stroke 25 6 16 26 31.5 14 24 35 40 8 24 36 48 50 16 36 50 64 63 16 42 59 78 　 FCS-FCD Bore Stroke 80 30 62 87 108 100 46 85 115 144 112 42 88 122 156 125 52 102 140 178 　 FCS-FCD Bore Stroke 140 62 122 162 204 160 82 142 192 240 180 96 168 226 280 200 112 192 256 320 　 　 Note : Model FCS-and FCD- Cylinders of bore not less than φ125 are customized ad options only. You are advised to contact our Control Products Section about the necessary delivering time. Ordering Information FCD − 100 − 144 − S0 − P �@ �A �B �C �D �@ �A �B �C Action Bore Stroke Spring FCS Single Action None Double Action FCD Double Action S0 Spring - less S1 Standard Spring �D Mounting None Body L Ell F Front Flange R Rear Flange T Trunnion P Pivot

For further details, refer to, Cat.No.KS-570E For further details, refer to,CADdata

Back